1. Support dual-drive/four-wheel drive mode;

1. Compatible with hub skateboard/belt skateboard;

1. The wheel diameter is adjustable;

1. The transmission ratio is adjustable;

1. The braking force is adjustable;

1. Bluetooth communication

1. fit for all skateboards using Hobbywing ESC

1. Suitable for our V2-Pro, V2pro classic,V3 bamboo,V3 bamboo 4WD,mini-board, Black Hawk and onther product.
   

1. Press and hold the "D" key for 2 seconds to turn on the remote control.

1. Push the roller forward, the skateboard accelerates forward, and push the roller backward, the skateboard brakes.

1. Click the "S" button to switch the riding mode.
Riding mode Maximum speed of each mode

1 (low) 10 mph/16 km/h

2 (middle) 18 miles/30 kilometers

3 (height) 25 miles/40 kilometers

4 (Pro) 31 mph/50 kph (instant acceleration)

Braking intensity varies with speed mode

1. Double-click the "D" key to switch the forward direction of the skateboard.

1. Press and hold the "D" key for 2 seconds to turn off the remote control.

1. Keep the remote control and circuit board powered off.

1. Press and hold the "D" power button on the remote control until the remote control displays "Remote Mode".

1. Scroll the throttle to select the 2WD or 4WD option, and press the "D" key on the remote control to confirm.

1. Long press the power button of the skateboard until the remote control shows that the binding is successful.

1. If you choose the 4wd mode first, you need to bind two ESCs in sequence. Please first Rear drive ESC pairing--(ESC1), and then Front drive ESC pairing---(ESC2).

Next, you will complete the following settings:

1. Unit system-select from [KM/H KM] and [MPH MILE].

1. Motor type-select [Belt/Wheel].

1. Wheel diameter-select the actual size of the wheel you want to use from [80-200].

1. Transmission ratio-36T pulley selection [2.6], 60T pulley selection [4.2]. ).

1. Motor pole pair selection [7].

1. Braking force.

1. Bluetooth on/off option.

After completing the above steps, the remote control configuration is completed, the screen displays, and the working interface is entered.